Present in combined spaces
Some UIndy classrooms may be combined to form a larger space and will allow for projection to be combined as well. This article is designed to guide users through presenting in combined spaces.
Navigate to the following article for detailed instructions on how to Use projectors.
When using projection in a combined space, one room will be designated as "the primary." Once enabled, the control panel of the primary room will override the controls of the adjoining room. Be sure that the combine function is enabled in the adjoining space in order to project from the primary room.
Understand general classroom technology
Project using wireless presentation
- Press the ON button on the control panel to turn on and warm up the projector.
- Once the ON button light has stopped flashing, press the WiPS button on the control panel.
If using wireless presentation for the first time, navigate to Present wirelessly on campus.
Project using an HDMI wired connection
- Connect a laptop using the HDMI cable (and, if needed, the appropriate adapter) that is provided.
- Press the ON button on the control panel to turn on and warm up the projector.
- Once the ON button light has stopped flashing, you may press the HDMI 1 or HDMI 2 button to project from your wired connection.
Please note: if your selection is already lit, you may need to press it again.
Audio
- Please be advised that you will have to wait until the ON button light on the control panel stops flashing.
- Audio may be adjusted at the wall plate. Turn volume dial up until the red light displays; then turn it back down to a satisfactory level.
Specific combined rooms at UIndy
In room 380 (the primary):
- If using the HDMI cable, connect the HDMI cable in the room to your laptop (using one of the adapters if needed). Make sure that the opposite end of the cable is plugged into one of the HDMI ports on the wall.
- Turn on your laptop.
- Press the ON button to turn on the projector and wait for the ON button light to stop blinking.
- Press the relevant source option:
- Press the HDMI button on the control panel that correlates with the numbered port on the input wall plate to which the HDMI cord is connected (e.g. HDMI 1, HDMI 2) for a wired connection.
- Press the WiPS button to use wireless presentation and log into the MirrorOp app on your device using the IP address and 4-digit Passcode that will appear on the projection screen.
- Image on the laptop will project on the screen.
After everything is projecting in room 380, in room 382:
- Press the ON button to turn on the projector and wait for the ON button light to stop blinking.
- Select the Combine button on the control panel (3rd button down).
- Image from room 380 will project to the screen in room 382.
In room 105 (the primary):
- Connect your laptop to the HDMI cable plugged into HDMI 2 input.
- Turn on your laptop.
- Turn on the projector and wait for the ON button light to stop blinking.
- Press the HDMI 2 button on the control panel.
- The image on the laptop will project on the screen.
After everything is projecting in room 105, in rooms 104 and 106:
- Press the ON button to turn on the projector and wait for the ON button light to stop blinking.
- Press the HDMI 2 button on the control panels in each room.
- The image from room 105 will project to the screen in rooms 104 and 106.
In the Athletics & Recreation Center (ARC), wireless presentation is only available in individual rooms and not when rooms are combined. To use wireless presentation, disconnect from combined spaces and use HDMI 1 in each individual room.
If you are having issues with projection, please navigate to the following article to Troubleshoot projection.
Remember:
- Turn off projectors after your class or during long periods of nonuse.
- Turn off the combined function by selecting HDMI 1 or HDMI 2 on the control panel of the adjoining space when finished projecting in a combined space.